ECU Cloning & Programming
Engine, gearbox and body modules read, written and cloned on the bench or via OBD — keeping VIN, IMMO data and adaptations intact. 1980+ engine ECUs, 480+ transmission controllers and 180+ body modules supported across every major manufacturer.
1980+ ECM types
Bosch, Continental, Delphi, Denso, Siemens, Marelli, ZF & more.
480+ TCM types
VW DQ200/250/380/381/500, ZF 8HP, Mercedes 7G/9G, Ford 6F35.
180+ body modules
BCM, BSI, CEM, KVM, RFA, SAM, Airbag, EPS & keyless hubs.
ECU Cloning
Mirror a donor ECU/TCM/BCM to a replacement unit — VIN, IMMO and adaptations preserved. OBD or bench.
Read / Write Flash & EEPROM
Full Eeprom / Dflash / Pflash / MAP read & write on 1980+ ECM, 480+ TCM and 180+ body modules.
ECU Virginising
Reset a used or locked ECU back to virgin state so it can be re-paired to a different vehicle / key system.
Mileage Calibration
Correct mileage stored in the ECU / TCM (incl. VW DQ-series gearboxes) after cluster swaps or module replacement.
IMMO PIN / CS Read
Extract immobiliser PIN, component security code or precode from the ECU for key programming.
ECU Recovery
Rescue bricked or failed-flash ECUs (bad tune, interrupted write, dead bootloader) via bench / boot mode.
MAP Read / Write
Pull and write tuning maps for stage tunes, DPF / EGR off files and back-up before remap work.
ECU coverage
Search by brand, ECU part number, manufacturer (Bosch, Siemens…), or system (MED17, EDC17, DQ500, SIM2K, MJD 8F3, CRD3, KVM).
Supported ECU manufacturers
Body / other module types